Friday, December 7, 2018

Ribbon Wrapped Round Containers DIY

When gift wrapping, a round box or container can be one of the most difficult shapes to wrap with paper!  Why not wrap with ribbon instead! Here's a fun way to use ribbon - yes,  ribbon to wrap that awkward round shape and then top it  with the prettiest of bows, too!


Welcome to Day 9 of the Fourth Annual 12 Days of Christmas Series!
DIY Christmas Ideas and Recipes you can use this year! DIY Christmas Decor and Games Ideas #12daysofChristmas
We have teamed up with 50 plus bloggers to bring you a oodles of DIY Ideas and Recipes to make your holiday season merrier. There are 12 different posts in the series and we have spread them out over a four week period with three posts per week. Now is the time to subscribe!
GO HERE for the complete list of Dates and Topics plus a collection of most popular holiday ideas including ornaments, games, recipes and more from all 50 plus talented bloggers!

Here's a recap:
Day 1 - DIY Wreath
Day 2 - DIY Gift Ideas 
Day 6 - DIY Ornaments
Day 7 - Decor

It's Day 9 and we are sharing 
Pretty Gift Wrapping Ideas!


Ribbon Wrapped Round Containers DIY
Do you have trouble wrapping round containers with wrapping paper? Well stress no more! Try wrapping with just ribbon! That's right, ribbon!  No paper whatsoever! Say what now? Yes, wrap round containers with ribbon! And it looks absolutely stunning topped with an adorable bow made using the Bowdabra bow making tool!

Materials:
50 yd. roll 1.5" wired ribbon (Sam's)
Round box/can (Walmart)
Bowdabra, bow wire, wand

First unroll several feet of ribbon so you can wrap the box freely. Please don't cut any ribbon off the roll! And don't panic! You won't be using 50 yards of ribbon but it's nice not to worry about running out of ribbon while you're wrapping!   

Let's begin by laying the beginning end of the ribbon across the top of the round can or container, leaving the end "tail" hanging. 

Start wrapping the ribbon down and around the can, crossing over at the center. 

Make sure the side edge of the ribbon is overlapping to the left and the tail stays in place.


This is the back after a few wrap arounds.

Continue wrapping the ribbon down and around, crossing over on the back, and  up and across on the top front, overlapping near the edge.


You will notice a lovely crossover pattern forming as you continue to wrap the ribbon around the can. Make sure you leave the beginning tail in place and hanging out as you wrap.



Once you've wrapped the box completely, measure the ending ribbon with the beginning tail and cut off the excess ribbon, leaving a matching tail. 


Pick up both tails and .  .  .

tie into a center knot.

Dove-tail the ends by folding the ribbon end together lengthwise and cut at an angle from the folded edge down to the end corner. 


To make a lovely bow with lots of 3" loops, fold an 18" piece of bow wire in half and place into the Bowdabra.  Next, cut 15 feet of ribbon from the spool. Fold the ribbon in half to find the center and crease, placing the ribbon pattern side down into the Bowdabra.



Because the pattern is only on one side of the ribbon, we will make a three inch loop by folding and twisting the ribbon to the right side down into the Bowdabra to make the first loop.


Next, fold and twist the other side at the same 3" width, down into the Bowdabra.


Continue to fold and twist the ribbon tails, one at a time, alternating sides, down through the center of the Bowdabra.

Continue folding and twisting as many loops down into the Bowdabra .  .  .
until reaching the end of the ribbon.

Scrunch down all of the ribbon using the Bowdabra wand.


Before taking the bow out of the Bowdabra, thread the two loose ends of the bow wire through the loop at the other end, pulling the wire tightly and gently pulling out the bow. Separate the two loose ends, taking them around to the back and tying in a double knot. 


Attach the bow to the top ribbon knot on the ribbon wrapped container with the bow wire, tying in a knot. Cut off excess wire.

Fluff and straighten the bow!

Now stand back and admire your gorgeous ribbon wrapped container!



Scroll down for many more Pretty Gift Wrapping Ideas!



Wednesday, December 5, 2018

Mug Cake in a Jar


Have you tried oui yogurt yet? It's so delicious and unlike any yogurt I've ever had! Besides being creamy thick with a fresh fruit flavor, it comes in the cutest glass jars ever! And I've save every last one that I've gotten, too! I must have a trillion of them - just kidding. But I do have a lot!  So when I saw the subject of the 8th Day of Christmas series, Christmas In a Jar, I knew I would be using these yogurt jars somehow! They are the perfect size for gift giving - especially to put mug cake mixes in!

Welcome to Day 8 of the Fourth Annual 12 Days of Christmas Series!
DIY Christmas Ideas and Recipes you can use this year! DIY Christmas Decor and Games Ideas #12daysofChristmas
We have teamed up with 50 plus bloggers to bring you a oodles of DIY Ideas and Recipes to make your holiday season merrier. There are 12 different posts in the series and we have spread them out over a four week period with three posts per week. Now is the time to subscribe!
GO HERE for the complete list of Dates and Topics plus a collection of most popular holiday ideas including ornaments, games, recipes and more from all 50 plus talented bloggers!

Here's a recap:
Day 1 - DIY Wreath
Day 2 -DIY Gift Ideas 
Day 6 - DIY Ornaments
Day 7 - Decor

It's Day 8 and we're sharing 
Christmas In A Jar Ideas!

Mug Cake in a Jar 
The ideal of a single serving dessert like mug cakes, makes for the best gift to give to so many for Christmas - co-workers, neighbors, teachers, caregivers - you name it!  The perfect home-made gift - and it couldn't be any easier to make! 

Materials:
Yogurt Jars
Fabric
Fabri-Tac Glue
Stencils
White chalkpaint/brush
1 Box Angel Food Cake Mix
1 Box Spice Cake Mix
Pastic Bags/rubber bands & twist ties 
Ribbon
Cardstock for recipe tag


  First, let's turn the yogurt jar into a pretty container with a fabric closure.  Make sure the clean jar is free of any oils or dirt by wiping down with alcohol using a paper towel. Next, to get the size of fabric needed, measure around the jar (circumference)and add 1/2" and then cut out the fabric. I got a 9"x 7" piece.


Run a bead of glue around the jar just below the top edge and place the right side down of the fabric edge over the glue and smooth the fabric on around the jar. Overlap the end and seal with additional glue. The fabric should look like a tube.

Next, pull the tube shape fabric up over the top of the jar, stopping just below the glued edge. Then run a bead of glue inside along the vertical edge to seal the fabric tube. You can then fold down inside and glue the top edge for a hem or border.



Next, to make snowflakes or any type of holiday design on the jar, place stencils on the glass and  .  .  .

dab the pattern with white paint and .  .  .

then quickly remove the stencils while the paint is wet.

This is the cutest way to add a fabric closure to open jars! You can use a small rubber band to gather and secure before tying on a decorative bow ribbon.


While the paint is drying on the glass, mix the two cakes mixes together really well! 

Insert a plastic bag into the jar. For each single serving, the recipe calls for 3 tablespoons of cake mix.  I was able to place four servings or 12 tablespoons of cake mix into the jar. After filling, close the plastic bag with a twist tie.

For an extra special touch, make tags with the recipe printed on to attach!
I used PicMonkey for designing the tags.And finally, tie bow ribbon on the fabric top with an attached recipe label tag.

Doesn't this mug cake look delicious? Especially if you top it with whipped cream! What a fabulous Christmas in a Jar ideal!



Scroll down for many more Christmas In A Jar Ideas you are sure to love!



Monday, December 3, 2018

Plaid Ribbon Decorative Cone Tree

 Decorative cone trees are everywhere during the holidays! The possibilities are almost unlimited when it comes to decorating them!  You can find all types made with just about anything! 

I love decorating cone trees! I've had in my mind to wrap a cone much like the bottle I wrapped with ribbon here. It's similar to the popular knotted jute netting design, only I just overlapped the ribbon instead of knotting it.  And in keeping with my purple buffalo plaid decorative theme this holiday season, I'm showing you how easy it is to make one using wrapping paper, ribbon and stick-on buttons. 

Welcome to Day 7 of the Fourth Annual 12 Days of Christmas Series!
DIY Christmas Ideas and Recipes you can use this year! DIY Christmas Decor and Games Ideas #12daysofChristmas
We have teamed up with 50 plus bloggers to bring you a oodles of DIY Ideas and Recipes to make your holiday season merrier. There are 12 different posts in the series and we have spread them out over a four week period with three posts per week. Now is the time to subscribe!
GO HERE for the complete list of Dates and Topics plus a collection of most popular holiday ideas including ornaments, games, recipes and more from all 50 plus talented bloggers!

So far I've shared:
Day 1 - DIY Wreath
Day 2 -DIY Gift Ideas 
Day 6 - DIY Ornaments

It's Day 7 and we are sharing Holiday Decor Ideas!

  Purple Plaid Ribbon Decorative Cone Tree
I love making cone trees to decorate my home. I have them everywhere and I try to make a new one each year. I was truly excited to make this one. It's been on my mind for a while.

Materials:
Paper Mache Cone
Embossed wrapping paper
Fabri-Tac Fabric Glue
5/8" Ribbon 
Push-pins
Hot Glue
Stick-on Decorative buttons

First, roll out the wrapping paper on a large work surface and lay the cone down on the edge of the wrapping paper. Gently grab the paper and cone together and begin rolling at an angle.


 Pay close attention to the tip making sure the paper is tight against the cone.

Finish rolling the cone until you meet the paper edge where the paper started, getting a good fit. Cut off excess paper the length of the cone.


While holding the paper together, run a bead of Fabri-Tac glue along the edges. Hold in place until the glue adheres - it only takes a few seconds. Insert glue around bottom edge between paper and cardboard and smooth out for a snug fit. Let dry and cut off excess paper at cardboard edge.

Next, cut eight -30" strips of ribbon. Turn cone upside down and space ribbon ends evenly around base of cone using push pins to hold.

Once satisfied with placement, add a small dab of hot glue to tips of ribbon and secure to cone base.


It's so much easier to work with the cone upside down for most of this process. To begin, take two strips of ribbon and criss-cross about two inches down, pulling ribbon tight, making sure ribbon is flat and add a dab of hot glue between the crossing ribbon. Press down and hold in place until secure. Continue around cone, criss-crossing ribbon and adding hot glue to hold - to form the first row of four groups of crossed or overlapped ribbon strips.

Start the second row by criss-crossing the right ribbon strip of one group with the left ribbon of the group beside it and hot glue in place, as before. Continue around on the same row until all ribbon strips are crossed and glued. 

Repeat the previous steps for each new row - taking the ribbon strip from one group to criss-cross with the ribbon of the other group next to it.

Continue criss-crossing the ribbon for each row and gluing in place. 

As you get closer to the top of the cone, the ribbon becomes closer to each other, and can become challenging to cross or overlap because of the width of the ribbon and the narrowness of the cone tip. Take your time with this.

I used push pins to help keep the ribbon straight and grouped.

Continue on until reaching the tip top, cutting off excess ribbon and using fabric glue to seal. 


And finally, add stick-on decorative buttons where the ribbon crosses. Make bows to glue onto the top for an extra cuteness!

I haven't decided where I'm going to place this adorable tree. - I haven't decorated for Christmas yet, but it's going to be a "WOW" factor wherever it's placed!   

I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Scroll down for many more Holiday Decor Ideas to creative a festive atmosphere in your home!