Sunday, July 19, 2020

Toilet Paper Flower Blooms DIY


Got toilet paper? I know you do! That's something we can't live without! But have you ever thought about making something decorative with it? I know there are lots of crafts out made with toilet paper cardboard tubes! But this is the paper! Why not craft your time away making adorable toilet paper flower blooms! Great for home decor, party decorations or even gift toppers! It's so simple and easy! And the best part, you only need four items to make:


Toilet paper sections - 5 per bloom
Tacky glue
Scissors
Floral stem wire

Lets begin by tearing off five toilet paper sections from the roll.

 Square each section by folding diagonally in half, cutting off the excess paper.
Then fold again, creating another triangle .  .  .
and fold one more time, making sure to line up the edges evenly, and smoothing the paper at the fold.
Now it's time to make the eight petal bloom to cut out! Here's a drawn-on line that shows you where to cut. But it's best to actually do this cut freehand - you don't want to put any marks on the paper. 
Start cutting at the side open edges, just below the middle section, around the next open edges and ending slightly lower at the middle folded area. The cut area should begin and end evenly across the same point.
Here's how the petals look open:
Next, fold the petals closed, staggering in-between and not evenly lined up. Add tacky glue along the bottom edge .  .  .

and gather the edge, twisting together .  .  .

forming a small center stem. Then make four more blooms the same way and let dry.
Next, fold a square toilet paper section into 4 sections and cut out. You will need five, so cut out an extra one from another section. Then take one section and add a large dab of glue to center and along edges. Place a floral stem wire in the middle cupping paper around it  .  .  .
to form a bud shape. Let dry.
Once the bud is dry, glue on the five flower blooms, one at a time, around the bud .  .  .
adjusting, curving and fluffing petals to form a larger flower. 
Would you believe these lovely flower blooms are made from toilet paper? 
You bet! How cool is this!

Thanks for stopping by

and take a little time to enjoy,
Happy Crafting!

Monday, July 13, 2020

Gimp Braided Trim Wrapped Ornament

 Welcome to our Monthly Challenge Blog Hop!  I've joined a group of creative bloggers to bring you a themed monthly challenge blog hop on the 2nd Monday of each month!  This month it's Christmas in July and time to get a head start on making all things Christmas!

I love making handcrafted ornaments for the holidays, but it can be quite stressful when you're trying to do a hundred other things! So now's the time to  begin creating those pretty ornaments you've had in mind for so long!  Here's an easy way of making gorgeous looking ornaments  -  if you have left over gimp braided trim like I do, how cool would it be to wrap a styrofoam ball around it and then top it off with a beautiful Bowdabra bow for a lovely Christmas ornament! It's definitely easy to make and yet very dramatic in design!

Materials Needed:
Styrofoam Ball
Acrylic Craft Paint
Ornament hanger (from broken ornament)
Gimp Braided Trim
Fabri-Tac Fabric Glue
Mini Bowdabra, Bow Wire, Ruler and Wand
5/8" Sheer Metallic Trim Ribbon 


Disclosure I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites, this post may contain links. I may receive a very small commission at no cost to you! The affiliate money I earn helps pay my crafting expenses. Thanks so much for your support!


Begin by placing the ornament hanger in the top center of the styrofoam ball. 
But in hindsight, it's easier to paint first using FolkArt Brush Metal to cover the white - let dry and then add the hanger.
Next, apply a generous amount of fabric glue around the base of the ornament and begin placing the trim down following the edge of the hanger, making sure the loops in the design are as close to the hanger as possible.
Continue applying glue in the width of the trim to the ball and then adding the trim  -
Make sure the trim fits as close to the previous row. 
And try to place the loops in the open grooves of the trim as you're gluing it on.
Proceed with wrapping the styrofoam ball with the trim being .  .  .
very careful with placement of the trim as the area gets smaller and smaller. You'll have to tighten it up a bit!
And finally, to finish, squish together the end of the trim in a circle while gluing it down, and then cutting off the excess.
Adorable - isn't it! But to complete the look, add a loopy bow to the top!
Here's how:
Using a Mini Bowdabra, insert a 24" piece of bow wire folded in half into the Mini Bowdabra, tucking ends under. Then, make a crease near the end of the ribbon and place into the Mini Bowdabra. Fold the ribbon at the 2" mark and press into the Mini Bowdabra. This is your first loop.
Next, fold the other side at the same 2" loop width. Continue folding loops one at a time down through the center of the Mini Bowdabra .  .  .
making 13 loops on each side for a total of 26 loops - this happened to be the end of the ribbon that's why 13 loops were made.  Then scrunch down the loops with the Mini Bowdabra Wand.  
While the bow is still in the Mini Bowdabra, thread the two loose ends of the bow wire through the loop at the other end pulling tightly, tie in a knot and gently pull bow out.
Fluff the bow, arranging the loops. Then tie the bow onto the hanger with the bow wire adjusting the wire through the center of the bow.  Make a loop with the two wires for hanging, tying the ends together and cutting off excess wire.
How adorable is this! Perfect for a Christmas in July project!
Now on to our Christmas in July Blog Hop!
Be sure to check out all the amazing Christmas in July projects from these talented bloggers:


You are invited to the Inlinkz link party!
Click here to enter

Thursday, June 25, 2020

Decoupage Napkin Flowers on Glass

I've had this clear glass jar with lid for sometime now. I bought it and other glass containers for my nieces' sweet sixteen candy buffet that I created. I love the shape of the jar and although it's perfect on its' own, I wanted to dress it up a bit - by decoupaging it with pretty napkin hydrangeas cut-outs!

I love to decoupage but I wanted to leave this container clear and not paint it. Usually, paint is used to define the images of the napkin and to make them sharp and distinct on whatever you are applying it to. But I wanted a more transparent or translucent look - like the flowers were floating on glass. And fortunately, the Mod Podge I used dried clear to make that possible. Noteworthy: I used Mod Podge Matte because it was what I had on hand, so this piece is for decorative purposes only. But you can use Dishwasher Safe Mod Podge which allows it to be used indoors or outdoors and safely cleaned by hand or in the top shelf of a dishwasher once cured following directions. 
   

Materials Used:
  • Glass container w/lid
  • Rubbing alcohol/paper towels
  • Decorative hydrangeas paper napkins
  • Hydrangeas petal paper punch
  • Matte Mod Podge or Dishwasher-Safe MP
  • Soft small paint brush
  • Printer paper/small scissors
  • Skewer stick
Begin by thoroughly washing the glass container and lid with dish detergent and water and then dry. Wipe with a alcohol soaked paper towel to remove any soap residue, dirt and oil. Let dry.

Now it's time to punch out the hydrangeas petals! Because the paper napkins are soft and difficult to get clean, sharp edges when punching, printer paper needs to be used. So, cut out 3" squares of paper and insert one on the bottom of the puncher . .  .
and then insert the napkin .  .  .
and finally, another paper on top of the napkin. In other words, the napkin is sandwiched between two sheets of paper to get a clean punch-out cut.
Then punch the petals out. You will probably need a skewer stick to lift and remove the paper cut-out .  .  .
and then the napkin petal cut-out. Be careful - even though the paper helped punch out the napkin, some edges may not be completely cut. Use small scissors to cut out any stuck pieces.
Then remove the plain layers of the napkin from the back of the printed cut-out.
 Position the hydrangeas petal on the glass and brush a small amount of Mod Podge behind where you want it to go and place on top, smoothing out with a small brush. Continue around the glass creating a beautiful random hydrangea design - applying decoupage, laying down the cut-out hydrangea petals and finally smoothing them out. Let dry, once finished with the placement.
Repeat the process for the glass top .  .  .
 applying decoupage and then the hydrangea cut-out designs. Let dry when finish.

And finally, add a few more coats of Mod Podge over the design to seal allowing it to dry between coats. 
What a fun way to add pretty designs to glass containers and tops!
Perfect and lovely for just about anything in decor!

Disclosure I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites, this post may contain links. I may receive a very small commission at no cost to you! The affiliate money I earn helps pay my crafting expenses. Thanks so much for your support!


I am thrilled to be a part of this Creative Craft Blog Hop created by Chloe @ Celebrate & Decorate and Andrea @ Design Morsels!
It's a great way for all of us to be inspired by an array of creative ideas and projects!
If you've hopped over after visiting Mary @Home is Where the Boat Is, I hope you enjoyed this tutorial on decoupaging flowers on a glass jar and lid! The next blog hop is to Jane & Sonja @Sustain My Craft Habit. I'm sure you will love their awesome creation!

See all the lovely inspirations by “hopping” to visit all of  these  awesome creative and innovative bloggers!