Tuesday, August 18, 2020

Painted Ping Pong Balls Wreath


I love the look of stylish wooden beads wreaths - made with real wood beads, and the wreaths made with half wood beads, too! And of course, the wreaths that are all the rage now, ping pong balls - faux wood beads wreaths using items from the dollar store! All of these have inspired me so much - that I just want to make one right now!  But I also have a selfish reason for making one, too!

Would you believe I still have lots of ping pong balls left over from when I made a remote control lamp out of them?  More than enough to make my very own version of this chic decorative trend - perfect for this months' Pinterest Challenge on Fall Projects! The purpose of the Pinterest Challenge is to motivate us to not just pin, but to make it happen!  And the best part, I had everything in my stash to make a lovely painted Ping Pong Balls Wreath - costing nothing for me to create! 


Disclosure I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites, this post may contain links. I may receive a very small commission at no cost to you! The affiliate money I earn helps pay my crafting expenses. Thanks so much for your support!

Here's what I used:
Ping Pong Balls (22)
14" Metal Craft Ring
Wire Cutters
Ice Pick
Drill
Acrylic Paint/brush
Multi-Purpose Glue/Hot Glue/Duct Tape
Fall Floral Stems with Leaves & Flowers
Wired Ribbon - 2.5"
Bowdabra/Wand/Bow Wire
Raffia

Let's start with the ping pong balls:
The first thing I did was to make holes in the ping pong balls. It was easiest for me to use an ice pick to gently punch a hole in one side, centering it through the ball and out the other side. This way the holes are evenly spaced on the ball. Then use a drill just to open the holes a bit wider on each side (one at a time) to accommodate the metal craft ring fit. Quick and easy!
Next, use a heavy duty wire cutter to open the ring where it was soldered together.

And then begin to push the balls onto the ring, one at a time  -  twenty-two total  .  .  .
leaving space for a bow, floral stems and flowers. 
Next, paint the balls using a wood tone color acrylic paint. This color is called Cafe Au Lait by Anita's, an all purpose acrylic by Rustoleum that was 79 cents a bottle. Can you believe it? Hobby Lobby was out of wood tone colors in the more expensive and popular brands and I was desperate when I started looking at Anita's. But when I saw the Rustoleum label on the bottle, I knew it couldn't be that bad. And it wasn't. One coat was all I needed! 
I guess you're wondering why I didn't paint the balls first before putting them on the ring. Well, it was easier to prop the ring up using clamps while painting, allowing the balls to dry completely without touching anything. 
After the balls are completely dry, join the ring ends to close using hot glue. The hot glue will grab the metal ends right away and keep them together temporarily.  Once the hot glue cools off, add a permanent glue or adhesive to the spot to keep the ring intact. Hot glue will not hold forever and will eventually loosen and cause the ends to separate. In addition, I covered the area with duct tape (can be painted) to further secure it.
Next, arrange the floral stems in opposite design directions around the open area of the ring. Use the faux beads as anchors, gluing the floral stems with leaves in place and wrapping the floral wire of the stems around the ring for extra stability.
And of course I had to use my Bowdabra to make a pretty bow with eight, 4" loops .  .  .
folding and twisting the ribbon back and forth .  .  .
and attaching the finished bow to the metal ring using the Bow Wire to secure.
Then add additional faux fall florals like mums, and more stems with leaves, filling in gaps .  .  .
including a small raffia tie for hanging, to complete the look! 
Don't you just love how the ping pong balls look - just like the real thing - wooden balls! 
Lovely in any Fall decor!


For more Pinterest inspired projects from this month's Pinterest Challenge hosts, check out the links below ↓






                       




Now, let's see what the other hosts have created ⇓⇓
You are invited to the Inlinkz link party!
Click here to enter

Monday, August 10, 2020

Pine Cone Flowers Shadow Box


I picked up a box shape frame sometime ago from Goodwill. I'm sure I paid a dollar or two but can't remember for sure. It's quite plain and I think I was attracted to it because of the color - a faded lavender - although it doesn't look like it in this picture. 
But I know I immediately thought of the possibility of making it a shadow box, too. It was deep enough that you can add just about anything you like in it to  display.   

Pine cones have always been quite popular in crafts, especially since you can find them almost anywhere outside. I have them literally in my backyard on  evergreens that are part of the community landscaping. 

I love using pine cones in my craft projects. I've bleached them, 
made napkin rings .  .  .
pine cone birds .  .  .
and would you believe a handcrafted turkey with a pine cone body?
I even made a pine cone flower tree. 
But the pine cone flowers were in their natural color for that project. Now, coloring and painting pine cones have become quite popular and trendy. And what better way to display some, but in a shadow box! 

You'll only need a few things to get started for this project:
  1. Pine Cones
  2. Tool to remove the pine cone scales (petals)
  3. Cardboard/scissors/glue
  4. Acrylic Paints
  5. Floral stem wires/twine/wire cutters
  6. Card stock
  7. Box Frame (thrift store)
Begin by removing the scales (petals) from the pine cones. The easiest way for me was to start at the base of the pine cone where the first few rows .  .  .


can be easily removed with your fingers. 
Once you've gotten these off, it's time to remove the larger ones.
I used a flat edge exacto knife to wedge the tip under the scale to twist and lift it off. The scale should pop right off. It takes practice to get the hang of removing them this way but it's a lot better than cutting the scales off which may cause them to split and become useless.
To create the flower, cut a quarter size circle out of cardboard. Then glue on the scales closely together around the circle .  .  . 
until it is completely filled in creating a flower-like look. Smaller scales can be added to the center to add dimension to the flower, if you like.
Next, paint the flowers in complementary decorative colors .  .  .
adding a dash of sunlight to the centers with a cool vibrant yellow.
Next, take the box frame apart to paint it a lovely dark plum and use the interior cardboard backing to make a new template on cardstock to use .  .  .
to place the pine cone flowers on. Create stems using floral wire wrapped in twine and painted green.  Then arrange it all in an adorable bouquet design.

And then adding a bow to complete the look!
Re-assemble the freshly painted box frame and admire the new shadow box showcasing adorable handmade pine cone flowers.
Just in time for our 
Monthly Challenge Blog Hop!

Each month, a group of craft, home decor, and recipe bloggers co-host a themed blog hop on the 2nd Monday of each month. The theme for August is Thrift Store Find Makeover Challenge. I do hope you've enjoyed how I made over a thrift store box frame into a shadow box showcasing handmade pine cone flowers for this challenge!


Now meet the other participants in this month's challenge. Be sure to stop by and check out their thrift store makeovers, too!


And don't forget to come back next month (September) for our ever popular 
Dollar Store Craft theme!
You are invited to the Inlinkz link party!
Click here to enter

Thursday, July 30, 2020

Updating a Brass Swan Dish

It's that time again for our monthly Thrift Store Upcycle Challenge, hosted by Angela @ Simply Beautiful by Angela! Here, a group of creative bloggers come together to share their lovely transformations of a thrift store item. 

The Rules:
  • Upcycle an item(s) from a thrift store, resale store, or garage sale into a new piece of decor.
  • There's no monthly theme.
  • There's no budget to stick to.

Meet the Hosts

Emily | Domestic Deadline - Beverly | Across the Blvd  
Lynne | My Family Thyme - Kathleen | Our Hopeful Home 


Our Thrift Store Upcycle group of bloggers is looking to expand -- and we need your help! Why not consider joining in our thrift store upcycle challenge on the last Thursday of each month? Make some friends while having fun and share your love of DIY with the world. It’s a win-win! Sound like something you’d be interested in? Just leave a comment at the end of this post with your contact info and a link to your blog. Someone will get back to you right away. We can’t wait to meet you!


Who doesn't love thrift store upcycle projects - whether it's actually creating one or admiring how an item from a thrift store was transformed!

We all feel great when a thrift store find ends up looking amazing! But what on earth did I have in mind when I picked up this sad looking brass swan dish - with a dirty patina finish - at my local Goodwill for a few dollars, well before the pandemic struck?
 What could I do? I didn't dare paint over the brass! It's such a small piece and the whole essence of the swan would disappear! So why not just clean it up? And that's exactly what I did, using a brass cleaner!  It now looks great, don't you think? Restored to its' former glory! But something is missing for this update! Style - Uniqueness? 
You've heard of the power of paint, right? Well, what about the power of decoupage? With decoupage, if it doesn't look right, you can just wash it off! Lol! What a fun way to jazz up pieces!
So I looked around in my stash of paper napkins to find a design that would enhance the "feathers" or "wings!" of the swan and its' brass finish! Not seeing anything I liked, I decided to make my own napkin design with a pattern I found online.
To do this, tape a plain white napkin to a sheet of printer paper using painter's tape.

Be sure to tape all of the side edges so the napkin won't jam in the printer. Ask me how I know this!
Place in the printer and hit print   .  .  .
to get a lovely paper napkin design! Just like that!
To decoupage, cut off the tape and remove the plain layers from the printed layer.


Then tear the napkin a little larger than the brass area. Apply a coat of Mod Podge to the brass using a paintbrush.  
Smooth the paper napkin on the wet decoupage medium, using a plastic baggy to remove any wrinkles or air bubbles, and let dry. Once the Mod Podge dries, apply at least one more coat on the napkin design to seal the piece. And let it dry completely.
Then cut off the excess paper napkin around the edges .  .  .
using a file to remove residual napkin paper and giving all the edges a nice clean finish.
How's this for style and uniqueness!
Adding an aura of extra prettiness!
Perfect as a decorative accent dish with a touch of glamour!
And now for more thrifty goodness!
Check out what my fellow upcyclers created below!
You are invited to the Inlinkz link party!
Click here to enter