Hello and welcome to our Creative Craft Hop hosted this month by Sara @Birdz of a Feather! We are delighted to have two hosts - Sara and Donna @ Modern on Monticello. Each one take turns hosting every other month! Thank you ladies for hosting this awesome Creative Craft Hop!
If you're coming over from Terri @Decorate with Tip and More, wasn't her sewing machine cover adorable! At the end of my post I'll tell you the next stop on this hop! But be sure to visit all of the creative crafters who joined this month for some amazing inspirations!
Today I'm sharing another fabulous wood veneer craft! I love working with wood veneer edging and I have a lot of it leftover from previous projects you can checkout here, here and here. I'm always looking for inspiration to use the wood veneer edging I have in my stash! Recently I came across a picture of a pendant light that was originally sold on West Elm but appears to be available here. When I saw this item,
right away I imagined making a tabletop candleholder out of wood veneer! I'm so excited to show you how I made a birch wood decorative candleholder for this month's Creative Craft Hop:
Materials Used:
- Birch Wood Veneer - 3/4"
- Cutting Mat, Ruler, Pencil, Scissors, Clamps
- Round Wood Slice - 5.9" 7/8" thick
- Round Wood Circle - 6" 1/8
- Wood Circle Cutout - 6" 1/8
- RapidFuse All Purpose Adhesive
- Tall plastic cup (8")
- Carboard tube (8")
- Glass Cylinder Vase 7.5" - Dollar Tree
- Paper Napkin
- Mod Podge Matte
- Brush
- Parchment paper or plastic wrap
- Colorful Flameless Tealight Candle
- LED Multi-Color Flameless Candles
Disclosure I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites, this post may contain links. I may receive a very small commission at no cost to you! The affiliate money I earn helps pay my crafting expenses. Thanks so much for your support!
Directions:
First, using a ruler and pencil, divide a thick round wood circle into four sections starting at the 12 o'clock spot down to the 6 o'clock spot Then draw a line from the 9 o'clock spot over to the 3 o'clock spot.
In other words, you should mark 3/4" from the end of each veneer strip and when you turn the strip over there should be a 3/4" mark at the opposite end on that side. You will use these marks to line up the strips with the edge of the wood circle
Directions:
First, using a ruler and pencil, divide a thick round wood circle into four sections starting at the 12 o'clock spot down to the 6 o'clock spot Then draw a line from the 9 o'clock spot over to the 3 o'clock spot.
Next, cut out sixteen, 16" long strips of birch wood veneer. There is a right side that shows the birch wood design. And a wrong side which is rough and actually has glue embedded on it.
After cutting out the sixteen strips, lay each strip on a cutting mat right side up and measure 3/4" from the end and draw a line. Then turn the strip over to the wrong side and on the opposite end draw another line at the 3/4" mark.
In other words, you should mark 3/4" from the end of each veneer strip and when you turn the strip over there should be a 3/4" mark at the opposite end on that side. You will use these marks to line up the strips with the edge of the wood circle
Once the lines are drawn, start gluing on the strips, first at the 12 o'clock mark using the pencil lines as a guide to gluing it on and . . .
Continue gluing on more veneer strips in the center of the 12 and 3 strips and then the centers in between those strips.
Adding veneer strips around each section - placing them evenly in-between until
the wood circle is completely filled in with wood veneer strips.
Then cover the ends of the veneer strips and circle base with a thin wood circle using RapidFuse - a quick grab and dry adhesive to seal.
Continue gluing on strips in-between those just like what was done on the bottom circle.
It might be necessary to remove the plastic glass support before gluing on more strips - you may have a hard time getting it out later. At this stage of gluing on the veneer strips, the cutout circle should be holding up on it's own.
You can use a thinner support like a cardboard roll - which I cut to the 8" size - until all strips are glued down on the circle cutout.
Once all the strips are glued on, add additional glue around on top. Then attach another wood circle cutout to the top to cover the strip ends to complete the design of the candleholder.
How cool does this look! I love the natural birch wood finish!
Next, I wanted to decoupage a glass candleholder with a pretty napkin design to place in the center. The lighter colors of the flowers in the napkin matched the birch wood veneer and would look extra pretty when lit using a flameless candle.To decoupage, remove the plain layers of the napkin from the back of the printed side.
Measure the napkin around the clean glass vase, cuting off excess napkin.
Apply an even light coat of Mod Podge using a paint brush in sections on the glass and . . .
lay the napkin (printed side up) on top of the decoupage glue. Use parchment paper or plastic wrap to gently smooth out the napkin. Continue adding Mod Podge to the glass and then smoothing the napkin down. Going around the glass in sections until all of the glass is covered with the napkin design. Let dry.
Decoupage candleholder with a colorful flameless tealight in purple.
Look how gorgeous the birch wood veneer decorative candleholder looks with a
Colorful Flameless Tealight Candle turned on!
And with a couple of my favorite looks using larger individual LED Multi-Colored Flameless Candles that's perfect for summer:
I hope you enjoyed reading how I made this adorable birch wood veneer candleholder!
Welcome once again to our Creative Craft Hop!
Up next is Cecilia @My Thrift Store Addiction sharing her lovely Garden Boots Planter. How cool is this!
Be sure to check out all of the talented bloggers sharing their awesome creations below:
Christmas In July Ornament - Tammy @ Patina and Paint
Beachy Bottle - Jenna @The Painted Apron










.jpgA.jpg)































