Friday, February 20, 2015

Hand Laced Chalk Cloth & Jute Twine Tote Bag



It's so cold outside that I'm staying indoors and shopping my stash to come up with things to make.   A few years ago I saw a video where a craftsman made a leather bag primarily by lacing the main body and straps together through punched holes.  Unfortunately, I didn't bookmark the video to give him credit and now I've been unable to locate it in my search.  Since I don't have leather anyway I decided to use a piece of chalk cloth remnant leftover from when I made a chalk cloth table runner here. 

You know how you can visualize something in your head but when you attempt to put it together, it doesn't quite go as you planned.  This might be the project that almost got scrapped.  I thought using chalk cloth to make a no-sew bag a terrific idea.  Chalkboard this and chalkboard that are very popular and trendy right now.  And when I did a google search I found just a "lunch" bag tutorial using the material.  Now I know why.  But I want you to be the judge of this project  .  .  .  as always.  No sewing was involved and I liked that!

Materials Used:
  • Chalk cloth
  • Jute twine
  • Ruler                                                       
  • Hole punch
  • Scissors
  • Chalk
  • Mode podge
Instructions:

Cutout the following from chalk cloth
Main body - 12"x27"
Side gussets (2) - 12"x6"
Handles (2) - 44"x2"
Jute twine - Lacing handles (4) 36",  Gussets (2) 36" 

The surface of the chalk cloth must be primed before writing on the cloth by rubbing the side of a piece of chalk over the entire surface from top to bottom and side to side.  Next, take a soft cloth to wipe off the chalk.  The fabric is now ready to write on.


Main body:
Punch 26 holes one inch from the sides of the chalk cloth and one inch from the top edge of the main body piece on each side.

Gussets:
Punch eleven holes on each side of the gussets and four holes on the bottom, 1/2 inch from the sides and 1 inch from the top edge.
For a better fit, round off the bottom edges of the gussets. 

Straps:
Punch six holes on each side of the straps, 1/2" from edge, lining up with the holes on the main body. Round off ends of straps as pictured.


Jute twine:
Wrapping straps:
Place a drop of glue two inches on the wrong side of chalk cloth from the last holes and place twine inside and close.  Begin wrapping twine around the chalk cloth strap pressing the cloth together as you wrap .  .  .
 
until you reach two inches from the holes on the opposite end. Glue as before.



Next, saturate the ends of the twine (cut to apply handles & main body) with mod podge and let dry.  The stiff ends wrapped with clear tape will make it easy to lace through the holes.


Position handles on the main body of chalk cloth two inches from edge and 7 1/2 inches down from top edge lining holes up with the main body holes. Starting at the back bottom, push ends of twine through holes, crisscrossing the twine as you go up. Reaching the top, tie off excess twine and insert ends into crossed twine. Repeat for both sides, front and back, lacing on both handles.  
                 


 
Adding Gussets:
*Gussets should be placed on the inside next to the main body, but after lacing them, there was too much cloth showing (wrong side) and bulking on the bottom so I laced them on the outside of the main body which looked a bit better.
Match up the holes on the gusset with the ones on the main body and start lacing at the top hole going in and out of the holes, all the way around.
 


 
Finish lacing the gusset to the main body by tying off the twine and inserting the ends into some of the inside loops.
 
 
 
Have fun writing on the chalk cloth bag:
 




 
 
 
 
What do you think?
 
 
I need to find some real leather, suede or pleather and make more!
 
 
 

Take a little time to enjoy

and

Happy Crafting!

 





















Saturday, February 7, 2015

Valentine 3D Heart Within A Heart


 
Thinking about a quick and easy way to decorate for Valentine's .  .   .  one that's different and catches the eye of your loved ones?  How about making a hanging 3D heart within a heart?

Materials needed:

  • cardboard
  • glittered cardstock
  • pencil
  • scissors
  • glue stick
  • decorative beads
  • twine

All you have to do is:
 
  • Draw two 1/2 heart images (smaller heart in center) on a 5 1/2"x8 1/2" cardboard and cut out.

  • Fold six or more* -  8 1/2"x11" sheets of glittered cardstock in half and using the cutout cardboard heart image, draw the hearts on the plain side of the cardstock, on the folded edge and cut out.  Make sure all the edges match perfectly.   * You can cut out as many as twelve hearts for a nice full, twirly look.  Also, save the middle hearts, glue together same way for cute little ornaments!

 
  • Using a glue stick, apply glue to the plain side of one closed heart and press a second closed heart together, making sure edges match.

  • Continue gluing hearts to one side until you have two sets of three or four hearts together.  Let dry completely.

 
 
  • For a bit of bling, add decorative beads to hanging twine and place beaded end in center of open heart group.
 
  • Apply glue to twine so that the beaded end is hanging down and straight.  Let glue dry.  
 
  • Once the twine is dry, close heart and glue second heart group to first group and let dry completely.  Finally, open and admire your handicraft!


Hang your open heart under a chandelier or in the window.  Make several and have a beautiful wonderland of glittery hearts!











 
Take a little time to enjoy

and

Happy Crafting!










Linking To: 

http://nicoleslifeafter20.blogspot.com/2015/02/weekend-wind-down-58.html?showComment=1423870628606#c26146915123240409

 

Saturday, January 31, 2015

Diy Pottery Barn Inspired Cork Wine Bottle Wall Hanging




My dear friend, Helen, gave me lots of wine corks she had accumulated before she and her hubby moved 400 miles away to a beautiful new home and warmer climate.  With the corks I made the usual spiral cork ball out of some of them but wanted to make something special and a bit different with the many I had left.  

I was so excited about finding a perfect piece of artwork to knockoff using wine corks. 


It's a stunning cork wine bottle image, 20 inches wide by 44 inches tall on wood.  

And the wall hanging was easy to duplicate just by counting the number of corks in each row, and basically hot gluing each one down in place into the shape of a bottle on black painted canvas. 

Just one thing, though, you have to realize that these are recycled used corks that have different shades, widths and lengths from the moisture of the wine and size of the bottles. 



So the corks didn't line up perfectly.


But I did group like corks together.



And I put down a piece of painter's tape and drew chalk lines on each side to try to keep the corks straight while gluing.


After gluing, I used red wine to "paint" some of the corks.


So, what do you think?



I think this grouping is perfect for wine lovers and wine themed spaces. 


And it cost next to nothing since I already had everything I needed on hand including the canvas.  Can you believe the original piece carries a $179 price tag? 

Hot dang!


Not bad, huh?

What a great way to use recycled corks.







Take a little time to enjoy

and

Happy Crafting!














Friday, January 23, 2015

Scrunchie Crepe Paper Valentine Heart DIY


Here's a fun, quick and easy Valentine project you can make on your own or with the kids.  

Just take a piece of crepe paper, roll it around a dowel rod on one side and then on the other side do the same, making sure your rolled paper rods come together in the center.





Stand the rods up and from the bottom, start pushing down on the paper with your fingers, crushing it together until all of the paper is crushed .



Remove the sticks from the paper and you have what I would call  crepe paper scrunchies! 

Now ready to make whatever you want!!!



One cool thing about these scrunchies is that they can be expanded a bit - by pulling them out and or glued together to make them longer! 
To make the heart, I glued the end together and pushed and glued the center down, forming a small heart.
Then, I rolled more crepe paper together in different colors .  .  .

crushed down together and .  .  .

glued one end together to make the scrunchie longer and then wrapped & glued them around the smaller hearts.  .  .  .
forming an adorable larger heart!

Imagine making several of these to place around your home for Valentine's Day decorating, or use in gift giving on wrapped presents, or you can do as I did, and glue a scrunchie covered stick to the heart and place in a potted plant or flowers .  .  .



Either way, this scrunchie crepe paper Valentine heart is sure to be a hit!






Take a little time to enjoy


and


Happy Crafting!









Linking To:

My Pinterventures