Tuesday, April 16, 2024

Upcycle Plastic Container Into Basket


If you're like me, you probably have bags full of different types of recycled containers. You just never know when you might need one for a project. Well the time has come when I do need one for a project for our Creative Craft Hop hosted this month by Donna @ Modern on MonticelloWelcome All! We are so glad you're here! Looks like I'm starting the hop off sharing my Upcycled BasketPlease don't forget to check out all of the stunning creative craft projects listed at the bottom of my post!

                                       
So I started looking at some of the containers that I have accumulated. I came across a good size clear plastic one - about seven inches tall and seven inches wide. It didn't have a top and I haven't a clue what was in it before. I just know it was nice and clean. And had a reflective look as if it was glass. But it wasn't. It was all clear plastic! So I decided to make a pretty basket - one for everyday use where I can store whatnots and catchalls! But I must say that it turned out rather pretty so it goes perfect with my decor, too!

                 

Materials Used:
  • Utility knife
  • Snips
  • Measuring tape, ruler
  • Chalk pen
  • Microfiber cloth
  • Twine - 3mm 109yds
  • Fabri-Tac Glue
  • Clamps
  • Plastic top (flat, large)
  • Plate (template)

Disclosure I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites, this post may contain links. I may receive a very small commission at no cost to you! The affiliate money I earn helps pay my crafting expenses. Thanks so much for your support!

And who doesn't love transforming trash into something useful and beautiful! So let's get started by removing the rim around the plastic container using a utility knife.
The plastic rim was quite difficult to remove. But I finally did it after the hubs saw me struggling with it - he recommended using a pair of snips which really got the job done.
               
Next, I used a tape measure to mark off the container in 1/2" increments using a chalk pen.
Then used a ruler to draw lines on the container every 1/2" to cut out 1/2" strips ending with an odd number of strips. Having odd number of strips helps to make the weaving even.
The strips were a bit hard to cut, too, but thank goodness for the snips! 
Once all of the strips are cut, use a dry microfiber cloth to wipe off all of the chalk marks.
Once done, turn the container upside down to begin the weaving process.
Attach the end of the twine just inside of one of the strips at the bottom using Fabri-Tac glue or any quick grab and dry glue. I am not a fan of using hot glue on plastic. With the twine still attached to the roll, start weaving it over and under each plastic strip. 
Continue going over one strip, under the next, over, under, over, under and so on, working your way around the container .  .  . 
pushing the twine together for a neat and uniform look .  .  .

until you have nearly reached the top. Then cut the twine off on the backside of a strip, adding glue to the end and sealing it to the strip.
Using a clamp, braid three pieces of twine 1.5+ times the length around the container to attach the braided twine to the top of the container. 
Once the strips are braided, glue on in increments using clamps to hold in place until dry. Be sure to cut off excess braiding to use later for the lid.
Now it's time to cover the plastic bottom!
Place a large dab of glue in the center of the plastic on the bottom. There was already an indentation there so it was not hard to find the center.
Then begin coiling the twine around in a circle on top of the glue .  .  .
adding more glue around on the plastic as you coil the twine .  .  .
coiling and gluing round and round until .  .  .
reaching the end.
How cool to see the coiling and weave when looking down into the 
clear container!

To Make the Lid:
Use a small plate, just the size that would cover the opening to draw a circle using a chalk pen on a plastic top for the lid. Cut out. 
Then begin coiling the twine on glue starting in the center of the plastic lid.
Continue coiling the twine, adding glue as you coil until .  .  .
the lid is completely covered with twine.
Then braid another strip of twine to glue around the edge of the lid.
Use the excess braiding twine to make a loop handle by gluing the ends together for the basket lid.
To attach the loop to the lid, place a large dab of glue in the center .  .  . 
and around the base of the loop on top of the lid. Add twine to base of the loop and begin coiling it around. Continue adding glue and coiling the twine until the loop until satisfied with the look to secure in place. 

What a lovely upcycle craft!

A basket .  .  .

for storage or .  .  .

 decor!

I hope you've been inspired to upcycle your trash to something you will treasure! 


Up next is Sara, @Birdz of a Feather, who happens to be one of our fabulous co-hosts! Sara is a very talented artist and today she is sharing her Dinosaur Wall Art which is amazing! And be sure to check out all of the talented bloggers sharing their awesome creations below:   

Upcycle Plastic Container Into Basket -  Gail @ Purple Hues and Me

Dinosaur Wall Art  - Sara @ Birdz of a Feather 

A Wine Bottle Gets a New Life - Ann @ The Apple Street Cottage

Embroidery Hoop Pocket Wreath - Niki @ Life as a Leo Wife

Paper Mache Bowl DIY - Terri @ Decorate and More with Tip

Hammered Flower Art Gift - Rachel @ Tea and Forget Me Nots

DIY Cooking Utensils - Tammy @ Patina and Paint



Special Occasion Blooming Wine Glass - Jenna @ The Painted Apron

11 comments:

  1. This is such a beautiful 'trash to treasure' transformation, Gail. No one would ever guess it started out as a plastic container. Love it!

    ReplyDelete
  2. Gail, you always intrigue me on your crafts. How you turned a plastic container and some yarn into an amazing container is unreal. You are very talented!

    ReplyDelete
  3. Sweet as can be Gail. You make everything so cute plus creative. Kudos to you.

    ReplyDelete
  4. Wow Gail, your mind never stops working! The basket is beautiful, no one would ever guess it started out as a plastic jar! Love your signature color, and it does look so pretty with flowers ~ super creative. Happy crafting, you are always an inspiration!
    Jenna

    ReplyDelete
  5. Wow!!!! Gail you always amaze me with your talent. That's a beautiful basket - love the way your mine works!

    ReplyDelete
  6. Wow, I can't believe how this started out. What an amazing transformation. Love the purple colour too.

    ReplyDelete
  7. YOU, my friend, have the patience of a saint! What a clever idea!

    ReplyDelete
  8. Gail, you are so clever. I had no idea where you were going with the cup, but it turned out both practical and pretty. Job well done.

    ReplyDelete
  9. Great Post

    https://plazamiddleeast.com/switch-gears-accessories

    ReplyDelete
  10. Gail, I love how you took a traditional craft and updated the materials to make something so very lovely.

    ReplyDelete
  11. Holey moley... I didn't see this one coming at all! Your basket looks so professional! Now that's an upcycle!

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...