Disclosure I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites, this post may contain links. I may receive a very small commission at no cost to you! The affiliate money I earn helps pay my crafting expenses. Thanks so much for your support!
Create a beautifully designed wire pumpkin from the dollar store using a simple macrame spiral knot. It's one of the prettiest knots and oh so simple to make! The knot is repeatedly tied around the wire pumpkin to create an amazing look for the Fall season. Perfect to share at our monthly Creative Craft Blog Hop!
Supplies Needed:
Wire Pumpkin - Dollar Tree
Natural Cord - Hobby Lobby 135ft. 4.5mm roll
Yard Stick/Scissors
FabriTac Fabric Glue
Let's start with a wire pumpkin from the Dollar Tree - that is, if you're lucky to find one. I went to three before I was able to get one. And then, only after asking. An employee was holding ten for herself and offered to give me one. Gee, thanks a lot!
But before we get started with actually tying the spiral knots, you need to figure how much cording you will need for each inside curved wire.
You don't want to run out of cord before you finish. Unfortunately, deciding how much you need is not an exact science. Lots of variables are involved. Like the size and thickness of the cord and what you want to make.
There are many videos on how to determine how much you will need. Some involving math and estimations. I will go with what I call guesstimating. Ha! I liked one tutorial that said to use 4-6 times the length of the project, or area in my case, and then double that amount. Whew! I think this was the worst part. So I measured the length of one of the inside curved wires and got a little over 14" so I rounded it off to 15 inches. Then multiplied that by 5 (between 4-6 right!) and got 75". I doubled that (75) to 150 inches for what I needed. So I got out my yard stick (36" long) and measured the cord for each wire curve 4 times (36"x4=144") - the length of the yard stick four times plus 6 inches to equal 150 inches.
Thankfully, I am using a roll of natural cord I got from Hobby Lobby. It had 135 feet of cord. There was more than enough to cover the entire wire pumpkin with spiral knots, including wrapping the stem with a back and forth design.
To Make the Spiral Knot:
The inside curved wires will be covered first and then the outside wire frame will be tied last with what's left. Normally, three cords are used, but in this case, the wire is used as the center cord with a left side cord and a right side cord. And the knot is always tied in the same direction creating the spiral look.
Let's start by attaching the cord (150") to the pumpkin wire by folding it in half and placing the middle of the folded cord at the back of the first inside curved wire. Then tie the cord in a simple knot around the wire and push it all the way up to the top.
Next, pick up the left cord and make an "L" shape across the wire and under the right cord.
Then take the right cord under the wire and over the left cord (L shape) and out.
Pull the right and left cords with the wire in the center to complete the first half knot.
Relax and binge-watch a movie while tying the spiral knots like I did.
moving around towards the left . . .
then down and around . . .
You don't want to run out of cord before you finish. Unfortunately, deciding how much you need is not an exact science. Lots of variables are involved. Like the size and thickness of the cord and what you want to make.
There are many videos on how to determine how much you will need. Some involving math and estimations. I will go with what I call guesstimating. Ha! I liked one tutorial that said to use 4-6 times the length of the project, or area in my case, and then double that amount. Whew! I think this was the worst part. So I measured the length of one of the inside curved wires and got a little over 14" so I rounded it off to 15 inches. Then multiplied that by 5 (between 4-6 right!) and got 75". I doubled that (75) to 150 inches for what I needed. So I got out my yard stick (36" long) and measured the cord for each wire curve 4 times (36"x4=144") - the length of the yard stick four times plus 6 inches to equal 150 inches.
Thankfully, I am using a roll of natural cord I got from Hobby Lobby. It had 135 feet of cord. There was more than enough to cover the entire wire pumpkin with spiral knots, including wrapping the stem with a back and forth design.
To Make the Spiral Knot:
The inside curved wires will be covered first and then the outside wire frame will be tied last with what's left. Normally, three cords are used, but in this case, the wire is used as the center cord with a left side cord and a right side cord. And the knot is always tied in the same direction creating the spiral look.
Let's start by attaching the cord (150") to the pumpkin wire by folding it in half and placing the middle of the folded cord at the back of the first inside curved wire. Then tie the cord in a simple knot around the wire and push it all the way up to the top.
Next, pick up the left cord and make an "L" shape across the wire and under the right cord.
Then take the right cord under the wire and over the left cord (L shape) and out.
Pull the right and left cords with the wire in the center to complete the first half knot.
Repeat tying this knot over and over making sure you are always tying the half knot in the same direction to create the spiral design.
I discovered that if you twist the spiral knots, a somewhat new look will emerge with the spirals closer together for a chunky design. And I like that look for the pumpkin!
Continue tying the spiral knots along each curved wire . . .
until all the curved wires are covered. Tie the ends of the cord for each wire into a final single knot at the back, sealing with fabric glue and let dry. Cut off excess cord.
Then start tying the outer frame just below the stem where it dips, the same as before with a folded cord . . .moving around towards the left . . .
then down and around . . .
and up and over. When reaching the stem, wrap the stem tip vertically and then the sides horizontally, tying in a single knot in back. Add glue to the knot to seal - let dry and cut off excess cord . . .
for a cool decorative look! Both front . . .
and back!
or with embellishments!
Welcome to another Creative Craft Blog Hop created by
Chloe @ Celebrate & Decorate and Andrea @ Design Morsels! I've teamed up with a talented group of creative bloggers to bring you lots of wonderful ideas and inspirations!
Have fun and get inspired by all of the wonderful creations this month by clicking on the links below!
If you're hopping along this blog hop, I hope you enjoyed Jenna's Painted Pumpkin Crate @The Painted Apron! Your next stop is Carol @Bluesky At Home sharing her adorable Dollar Tree Fall Yard Art!
Gail, you have transformed this dollar store pumpkin! This is the first macrame pumpkin I have seen, so I love the creativity! Pinning, and I'll be sharing on IG, too! Blessings, Cecilia
ReplyDeleteThis comment has been removed by the author.
DeleteThanks, Cecilia! It was fun to make!
DeleteGail, what a clever idea! I'm sure I've never seen a macrame pumpkin before. This is just an adorable craft for fall.
ReplyDeleteThanks, Rachelle! The macrame knot was so simple, I thought it perfect to use on the pumpkin wire.
DeleteWhat a cute way to decorate a pumpkin! It looks great!
ReplyDeleteLiberty
Thanks, Liberty! Yes, I thought it would be fun to macrame the pumpkin wires!
DeleteThis turned out so cute and I love it! Wonderful craft hopping with you friend!
ReplyDeleteThanks so much Chas! It's always fun craft hopping with you too!
DeleteWhat a darling project. I love that you could relax and watch some tv while tying the knots.
ReplyDeleteThanks, Linda! Yes, I had to do something else other than tie knots. It can get a bit tedious. Lol!
DeleteGail, you are one very clever crafter! I love this project. If I’m lucky to find the wire base, I see this as art therapy for those long evenings of nothing new on TV. Instead of feeling my nerves are all in knots, I’ll be tying them lol! Thanks for such a wonderfully detailed tutorial.
ReplyDeleteThanks, Debbee! I know exactly what you mean. I have to keep looking for craft things to do. I'm at my limit with everything else!
DeleteWow Gail, this is SOOO cute! Kudos to you for figuring it all out, math was never my strong suit 😂 or is patience so I truly admire your dedication, it totally paid off, the knots look awesome! I love the way you added the flower, leaves and berries, but it looks great unadorned too! Fabulous!!
ReplyDeleteJenna
Thanks, Jenna! Math and I never got along either. I just guessed my way through it all after looking at too many videos on how to figure out how much cord is needed. I think I got brain freeze from it all!
DeleteYou did a great job making this pumpkin decoration Gail! It will look so pretty for fall.
ReplyDeleteThanks, Julie! I think so too. I might even paint the knots. We'll see!
DeleteI had no idea macrame knots were so simple. This is a really great tutorial. I love that the pumpkin is reusable. Thanks for being part of the hop.
ReplyDeleteThanks so much, Andrea! It was fun making the macrame pumpkin! And I love being part of the hop. It's one of my favorites. Thank you for organizing it each month.
DeleteYou’ve elevate your Dollar Tree wire pumpkin to a piece of art and wonderful fall décor!! Happy to be crafting with you again!
ReplyDeleteSiempre original amiga.
ReplyDeleteEspero que todo vaya bien
Brilliant Dollar Tree upcycle! I'd love for you share over at our Wednesday weekly Creative Linky Party https://creativelybeth.com/creative-crafts-linky-party-4-join-in-the-fun/
ReplyDeleteHave a great weekend!
Creatively, Beth
Gail, this is such a unique take on fall decor! You have offered such perfect detailed instructions, even I could follow these!
ReplyDeleteGail, this is fabulous! I bought 2 of those DT pumpkin wreath forms last year, so now I know what I'm going to do! I've been wanting to try macrame, and you've provided an excellent tutorial for beginners. I think it looks great neutral and unadorned...it's got that Farmhouse vibe. Thanks for sharing! It was fun hopping with you again!
ReplyDeleteI like this this is a great creative idea in a great tutorial thanks for sharing
ReplyDeleteGail, I am so impressed with your pumpkin. I would never have thought of this treatment. It's very pretty and unique. Super cute.
ReplyDeleteThis is so creative. Great job.
ReplyDeleteHow beautiful! What a creative was to do macrame too, perfect for this time of year.
ReplyDeleteMy mom loves macrame projects - I just shared this one with her. It's also one of my features at this week's Snickerdoodle Create Bake Make Link Party, which goes live today at 5pm EST.
ReplyDeleteAlexandra
EyeLoveKnots.com
So dang cute and smart,Gail... thanks for sharing this simple knot tutorial and how to upscale a wire pumpkin!
ReplyDeleteWhat a cute idea and so pretty!!! ~ Kristin | White Arrows Home
ReplyDeleteSo cute and clever!!! I love this pumpkin, so I featured it at this week's Snickerdoodle Create Bake Make Link Party!
ReplyDeleteLove your fall pumpkin!!! Thanks for sharing at Share Your Style a couple of weeks ago. I am just getting back from a small vacation to California so am picking up SYS #272 and featuring your post this week. <3
ReplyDeleteHappy almost fall!
Barb :)
www.frenchethereal.net
This is the most beautiful harvest craft i've seen using macrame. You are very creative. I'll be trying to make it this season. Thx. God bless you.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteJust finished making this project. Love it so much I am keeping it! LOL Thanks for sharing this amazing project!
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDelete
ReplyDeleteThank you very much for presenting such a wonderful blog here.
4WD Tractor price
Nice blog ! thanks for sharing , please keep it up. - Powertrac euro 50
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteNice, I definitely liked every part of it and I even saved your site in favs to see all your new information. Superb thanks once again. - new holland 3230
ReplyDeleteThis info is meaningful and important for everyone to increase our knowledge about it. Always keep sharing this kind of info. Thanks once again for sharing it.mahindra yuvo
ReplyDeleteThis is a beautiful content, I enjoyed it.
ReplyDeleteSwaraj Tractor price
It is excellent and informative for everyone. Always keep posting. I am very thankful to you. Thanks once again for sharing it.
ReplyDeletemassey ferguson di tonner
Hey, Your blog is really informational and I would like to suggest this post further.
ReplyDeleteSame Deutz Fahr Tractor
informative visit best wedding resort in lonavala
ReplyDeleteINFORMATIVE VISIT Balaji Travels Shopee - Tours & Travel Company in Pune
ReplyDeleteIt looks really cool. Thanks for sharing how to make it! Exterior Painter Joliet
ReplyDeleteBeautiful article
ReplyDeleteThanks
Decorating a wire pumpkin using a simple macrame knot is a creative and fun DIY project. Measure and cut several pieces of macrame cord, each about 3-4 feet long. The number of cords you need will depend on the size of your wire pumpkin and how densely you want to knot it.
ReplyDeletevirginia personal injury statute of limitations
Skilled criminal defense attorneys in Fairfax County, VA offer competent legal representation. Put your trust in knowledgeable experts to successfully navigate the complexities of the legal system and protect your rights.
ReplyDeleteCriminal Lawyers in Fairfax County VA
A Conversion Divorce New York State occurs when a legal separation agreement is converted into a divorce decree after a specified period, simplifying the divorce process.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteIt looks really cool. Thanks for sharing how to make it!
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteHow much cord do you have to have to cover the outside of pumpkin? I did not see that in the directions. If I missed it I apologize. My inside wires (ribs) worked out wonderfully with your measurements. Thanks for your help in advance. Lois
ReplyDeleteThis article cleared up so many of my doubts. Thanks for explaining it so thoroughly!
ReplyDeleteNet Promoter Score
This Best Leon Kennedy Costume Ideas guide holds a bunch of essentials that you’d need to replicate the same look as his from the game.
ReplyDeleteI am really glad to see this post. I also want to recommend you to try this Wizards Beyond Waverly Place Selena Gomez Shearling Coat.
ReplyDelete