Monochrome Soda Bottle Goody Bag

           

Repurpose a throw away soda bottle (trash) into a lovely monochromatic goody bag!  Something so creative, enjoyable and beneficial for the environment at the same time! A goody bag made out of a recycled soda bottle is so simple to make resulting in a gorgeous look especially when trimmed in a black filigree monochrome color! I love using soda bottles in projects as seen here, here, here, here, here, and here! I think I may have gotten carried away crafting using soda bottles, but this monochrome craft is such a cool project- although I would have preferred to used purple as the monochromatic color, lol!

It's time for another Sustainable Craft Challenge hosted by Julie @Sum of Their Stories! Welcome! This challenge is all about sustainable crafting with a different theme each month!  The projects must have some sort of a sustainable element to them. This could be an upcycling or recycling element, or something that reduces waste, uses leftovers, etc. This month's theme is Monochrome! I know! Are you wondering what eco-friendly craft can we come up with that's monochromatic? I did too! But Julie put us at ease with saying it's OUR interpretation of a craft using only one color or a variation of one color- black, white, or gray. I must say that I'm using a plastic soda bottle which is clear! No color, but by using black trim to decorate it makes it, I think, a monochrome project, lol!

So let's get started!

Supplies:

• Plastic Soda Bottle (2.9 Qt.)
• Vaseline
• Masking Tape
• Craft Knife/Scissors
• Bone Folder
• Ruler/pen
• Black Filigree Frame images
• Clear stencil sheets
• Gorilla Glue with Brush for plastics
• Stiff Black Felt
• Hole puncher
• Bow ribbon

Disclosure I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites, this post may contain links. I may receive a very small commission at no cost to you! The affiliate money I earn helps pay my crafting expenses. Thanks so much for your support!

How to:

Begin with a clean plastic soda bottle. I keep emphasizing plastic, but when I was little, soda bottles were made out of glass and had to be returned for a small deposit. Maybe we should go back to that! It would certainly help the environment in so many ways! Anyway, on to my project!  I got this particular soda bottle from the Dollar Tree. It has a smooth surface with no ridges - perfect to make a goody bag! But first, remove the label.

If there is any adhesive left on the bottle that you can't get off after removing the label, apply Vaseline and let it sit on the glue for a few hours to work its' magic! 

Then clean off with soap and water; let dry for a nice smooth finish.

Next, tape off the top using masking tape and .  .  .

begin cutting the top off using a craft knife to get you started following the edge of the masking tape.

Once you have a slice opening big enough for scissors, switch to sharp scissors to finish removing the top. 

It's so much easier using scissors to cut the plastic for a nice smooth edge.

To remove the bottom portion of the soda bottle, follow the line that's inscribed in the plastic for easy removal .  .  .

resulting in a nice plastic cylinder shape.

For a rectangular shape bag, flatten the plastic and . . .

using a bone folder or the round handle end of scissors, flatten one side of the  plastic in half and .  .  .

then "by eye" flatten the other side in a .  .  .

smaller width.

Complete forming the bag by using the bone folder to flatten the remaining sides in the same widths of the larger and smaller sides.

To make flaps on the bottom to close, measure the width of the front side and divide in half, 

cutting up the sides and .  .  .

folding over to overlap the four flaps. 

To decorate the goody bag, I found a free image online of a black rectangle filigree which I resized in Word to fit the front, back and sides of the goody bag - then copied the images on clear stencil sheets and printed out using a laser printer.

                                                          

               

Attach plastic filigree images to bag with quick dry glue.

 

           

Cover the inside bottom of the bag with a piece of stiff black felt cut to size. 
                               

Use a hole puncher to make holes near the top for the ribbon handles.

Just insert black ribbon ends through the holes, one side at a time and tie into a couple of large knots to secure. 

To complete the look, add a simple black and grayish bow for an adorable monochrome soda bottle goody bag! Perfect to use for any occasion or celebration! 

I hope you enjoyed how I made my Monochrome Soda Bottle Goody Bag!

Welcome again to our Sustainable Craft Challenge Blog Hop!  

Be sure to check out all the creative "Monochrome" Sustainable Craft projects from my fellow crafters listed below:

Julie @ Sum of Their Stories  - Monochrome Patchwork Bag DIY

Marci @ Old Rock Farmhouse  -  Simple Silhouette Greeting Cards

Gail @ Purple Hues and Me  -  Monochrome Soda Bottle Goody Bag

Allyson @ Southern Sunflowers  -  Easy DIY Button Art on Canvas - Tutorial for Adults

T'onna @ Sew Crafty Crochet  -  Monochrome Crochet Scarves

Terri @ Our Good Life  -  Monochrome Watercolor Painting